Abstract
The expansion of consumer and wireless devices has placed increasing demand on signal bandwidth. This increased demand on a finite resource is in turn driving interest in more efficient ways to use available bandwidth. One approach is through mixed modulation of existing waveforms to achieve complementary objectives. Historically, mixed modulated signals have been designed to include some degree of orthogonality between the different waveforms to preclude interference. Such approaches usually involve use of time division multiple access (TDMA) or code division multiple access (CDMA), or the use of orthogonal frequency division multiplexing. With the evolution of digital signal processing, another approach is mixed modulation through intended modulation on pulse (IMOP). In the past, IMOP was challenging due to both the obvious cross interference concerns and the limits of signal processing technology [1]. However, advances in both digital electronics and signal processing have opened the door to re-exploring IMOP approaches.
Original language | English |
---|---|
Article number | 7746568 |
Pages (from-to) | 28-35 |
Number of pages | 8 |
Journal | IEEE Aerospace and Electronic Systems Magazine |
Volume | 31 |
Issue number | 10 |
DOIs | |
State | Published - Oct 2016 |
ASJC Scopus Subject Areas
- Aerospace Engineering
- Space and Planetary Science
- Electrical and Electronic Engineering
Keywords
- Radar Communication
- Linear Frequency Modulation
- M-sequence
- Reduced Phase Magnitude
- Modulation Waveform
- Phase Shift
- Power Spectral Density
- Single Pulse
- Communication Signals
- Radar Signal
- Low Data Rate
- Binary Phase Shift Keying
Disciplines
- Electrical and Computer Engineering